Bicycles

Zip-tie-inspired bike lock won't weigh you down

Zip-tie-inspired bike lock won't weigh you down
The OttoLock on display at Interbike 2016
The OttoLock on display at Interbike 2016
View 3 Images
The OttoLock reportedly weighs less than a quarter of a pound (115 g), and will be made in band lengths of 18, 30 and 60 inches (35, 75 and 150 cm)
1/3
The OttoLock reportedly weighs less than a quarter of a pound (115 g), and will be made in band lengths of 18, 30 and 60 inches (35, 75 and 150 cm)
The OttoLock on display at Interbike 2016
2/3
The OttoLock on display at Interbike 2016
You just feed the OttoLock's band through its head, the latter of which locks against grooves on the former
3/3
You just feed the OttoLock's band through its head, the latter of which locks against grooves on the former
View gallery - 3 images

If you're a competitive or recreational cyclist, chances are that you don't lug a clunky ol' U-lock along with you on all of your rides. So, what happens if you make a quick post-ride stop at a coffee shop? Perhaps you just try to keep your unlocked bike in your peripheral vision, or you use a light-but-flimsy cable lock. Well, Otto DesignWorks has developed an alternative. Its OttoLock works essentially like a big cut-resistant zip-tie.

Although the OttoLock's quarter-inch (18 mm)-wide band may be coated in plastic, inside of it there are four bands of high-temper stainless steel, along with one made of Kevlar. Those inner bands slide against one another, reducing shear forces applied by tools such as bolt cutters.

The head of the device is made of impact-resistant aluminum, and has a three-digit user-resettable combination lock.

When not in use, the OttoLock can be coiled down to a 3-inch (76-mm) diameter loop, and stuffed in a saddle pack or jersey pocket. When it's time to lock up the bike, it really is like using a zip-tie – you just feed the band through the head, the latter of which locks against grooves on the former.

The OttoLock reportedly weighs less than a quarter of a pound (115 g), and will be made in band lengths of 18, 30 and 60 inches (35, 75 and 150 cm)
The OttoLock reportedly weighs less than a quarter of a pound (115 g), and will be made in band lengths of 18, 30 and 60 inches (35, 75 and 150 cm)

To release the lock, you just key in the combo. According to the company, thieves trying to rip the band through the head without unlocking it would have to apply over 500 lb (227 kg) of force.

The whole thing reportedly weighs less than a quarter of a pound (115 g), and will be made in band lengths of 18, 30 and 60 inches (35, 75 and 150 cm). It's currently the subject of a Kickstarter campaign, where a pledge of US$49 will get you a 30-inch model – when and if they reach production.

For a couple of other takes on the "coffee shop lock" idea, check out the Hiplock FLX and the Lazer Cappuccino.

Source: Kickstarter

View gallery - 3 images
2 comments
2 comments
XtineCKarman
That lock is laughable. They cut a heavy steel lock in three seconds. This lock takes the average bike thief three milliseconds.
ljaques
I guess having cool looking locks would slow down the rest of the campus from stealing your bike during classes, but it would take less than 3ms for a slow bike thief with a broom handle for the lever.